Feature List
1. 30 Day free evaluation period - it costs you nothing to try EditComm.
2. Easy installation - just run Set-up.exe and follow on screen instructions.
3. Auto sensing of vacant serial port and setting port to Colchester / Harrison default settings when EditComm is run for the first time on your computer. No complex set-up, you just connect the cable to computer and machine.
4. User able to set EditComm to use any font and colour combination that is available on their computer within the EditComm edit windows.
5. EditComm is a Multiple-Document Interface Application, therefore you can edit more than one part program at the same time. Cut, copy and paste fully supported between all open part programs.
6. EditComm allows user to insert spaces in part program block to aid reading.
7. Forget to save that all important part program before closing and EditComm will prompt you to do so.
8. Easy upload and download of part programs - just click on icon, select filename and click OK.
9. Uses Windows 95 or later - if you can use any windows based program you will feel right at home with EditComm.
10. Parameter compare function included to diagnose possible machine parameter problems.
11. Low cost solution to your part program security needs.
12. Easy backup of part programs to floppy disc.
13. Easy file protection option.
14. Popdown menu for access to functions relative to the part program you are editing.
15. Works with ISO and Heidenhain formats
16. Ability to renumber Heidenhain part programs after editing prior to downloading to machine.
17. Forgotten where you have stored that all important part program? Use find part program to search your hard drive or floppy discs, just input search criteria and click on search..
18. EditComm can be setup to a single comms setting (default) or use machine IDs allows EditComm to be setup for different control settings.
19. Search part programs using find & find next.
20. Recent file list - easy access to last six part programs worked on.
21. Deleted part programs now sent to recycle bin for added security.
22. Automatically open part programs when uploaded.
23. Auto insertion of sequence numbers (Fanuc)
24. Trigonometry Calculator (find all sides and angles on right handed triangles).
25. Constant Surface Speed Calculator.
26. TNR Compensation Calculator for angles.
27. Convert Degrees, minutes and seconds to decimal degrees.
28. Renumber Fanuc part programs ( P & Qs automatically renumbered).
29. Remove sequence numbers from Fanuc part programs.
30. Decode Operation History (Fanuc 21I).
31. Part program syntax check (Fanuc).
32. Imperial / Metric conversion during part program editing.
33. Replace with added to find/find next routine.
34. Sequence number start and increment now settable.
35. Option to monitor serial port for incoming part program (no longer needed to get the receiving device ready first ( Needs cable suitable for RTS/CTS handshaking). Plus
delay timer if required (Haas Controls)
36. Waveform Diagnostic decode for Fanuc 21I controls.
37. Password protect write protected part programs.
38. Fraction to Decimal Conversion Calculator including optional Imperial to Metric conversion.
39. Option to ignore leading characters during upload of part program added.
40. Multiple level Undo and Redo within edit windows.
41. New option in find & replace to allow searching for whole words or single characters, also find previous added (F4) to work along side of find next (F3).
42. Option to use file extensions that reflect machine type.
43. Increment added to Find/Replace.
44. PCD Calculator added. (Generates expanded code)
45. Deep Hole Drilling Cycles. (Generates expanded code)
46. Internal Grooving Chipbreak Cycle. (Generates expanded code)
|
